Development of Micro Electrical Discharge Machine and Micro-hole Machining Using Multiple Micro Electrodes
Min Chul Shin (Shin MC), Bo Hyun Kim (Kim BH), Gyu Man Kim (Kim GM)
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):101-108.   Published online 2024 Jul 1     DOI: https://doi.org/10.57062/ijpem-st.2024.00031
Citations to this article as recorded by Crossref logo
Investigating Wire Electric-Discharge Machining (WEDM) Parameters for Improved Machining of D2 Steel: A Multi-Objective Optimization Study
Saif Ahmad Afridi, Muhammad Younas, Zarak Khan, Aqib Mashood Khan
International Journal of Precision Engineering and Manufacturing.2025;[Epub]     CrossRef
Tribological Design Optimization of Probe Card Tip for Enhanced Chip Manufacturing Productivity
Tae-Hyeong Kim, Jin-Yeob Jang, Hae-Jin Kim, Dae-Eun Kim
International Journal of Precision Engineering and Manufacturing.2025;[Epub]     CrossRef
Effect of Radial Force and Radial Torque on Hole Quality Characteristics During Micro-Drilling of Nitinol Shape Memory Alloy
Chaitanya Satish Kumar Matta, Gangadharudu Talla, K. R. Ashwinkumar Hegde, Soumya Gangopadhyay
International Journal of Precision Engineering and Manufacturing.2025;[Epub]     CrossRef
A Method to Enhance the Depth-to-Diameter Ratio of Micro-Holes Drilled with EDM Using the Pressure Difference Created at the Hole Entrance
Ye Chen, Dahai Mi, Wataru Natsu
International Journal of Precision Engineering and Manufacturing.2024;[Epub]     CrossRef
Strontium-Doped BaZr0.8Ni0.2O3-δ Cobalt-Free Cathode Materials for Solid Oxide Fuel Cell
Lukman Ahmed Omeiza, Asset Kabyshev, Kenzhebatyr Bekmyrza, Marzhan Kubenova, Kairat A. Kuterbekov, Aliya Baratova, Saule Adaikhan, Saifullah Abu Bakar, Abul Kalam Azad
International Journal of Precision Engineering and Manufacturing-Green Technology.2024;[Epub]     CrossRef
The High Cycle Bending Fatigue Property of Quenched Crankshaft Based on the Stress Field Intensity Method and the Multi-physic Field Coupling Numerical Simulation Approach
Shanshan Shen, Qifeng Gao, Hongqian Hu, Yimeng Xu, Songsong Sun
International Journal of Precision Engineering and Manufacturing.2024;[Epub]     CrossRef
Formation Mechanism and Quality Assessment of Microstructures Fabricated on PCD Tools by Electrical Discharge Machining
Shuquan Song, Yu Sun, Fei Dou, Haoyu Sun, Long Liu, Dunwen Zuo
International Journal of Precision Engineering and Manufacturing.2024;[Epub]     CrossRef